Wood/coal boiler Atmos AC25S 26kW + buffer tank 1000l + accessories SET
Wood/coal boiler Atmos AC25S 26kW + pellet adjustment
Eco-Design certificate
Thanks to its design, the ATMOS ACxxS boiler uses the principle of generator wood gasification. The boiler body consists of 6-8 mm thick boiler plate. The combustion chambers are equipped with ceramic elements that allow proper wood burning, thanks to which the boiler achieves high thermal efficiency. The centrally arranged rotary gasification grate replaces the ceramic nozzle. The lower chamber is equipped with spherical ceramics. There is a flue gas duct in the rear part of the boiler. The recommended fuel is hard coal, dry logs. The boiler is equipped with an exhaust fan and a cooling coil in case of overheating. This offer includes a boiler in a variant with an adaptation for a pellet burner (to be mounted in the upper door). A burner from ATMOS or another company, e.g. KIPI, Kostrzewa, can be used. This means that the boiler can be operated in the classic way (burning of wood/coal) but also with pellets if required. The boiler is supplied with the original cover plate, which is fitted when firing with wood/coal. However, if you are heating with pellets, screw the burner tight at this point.
DIMENSIONS:
Height: 1185mm
Width: 675mm
Depth: 758mm
Exhaust outlet height: 874 mm
Chimney diameter: 150 mm
Amount of water in the boiler: 45 l
Fuel tank capacity: 65 dm3
Maximum log length: 330 mm
Boiler class: 5 + ECO DESIGN
Energy efficiency class: A+
BOILER ADVANTAGES:
- the ability to burn large pieces of wood, 330 mm long
- high performance;
- Exhaust fan = smoke-free boiler room, dust-free ash removal;
- cooling circuit against overheating;
- Automatic shutdown of the boiler after burning the fuel;
- convenient ash removal thanks to a large ceramic chamber (in the case of wood, it is removed about once a week);
- Boilers without a tubular heat exchanger (easier to clean);
- good quality.
Control Tech I-2:
TECH I-2 PLUS CONTROL UNIT
is the newest regulator model offered by Tech
- The controller is designed to control 2 mixing valve actuators.
- It has a high-resolution LCD display that shows all the parameters of the installation.
- Possibility to connect 2 heat sources
- Possibility to control an additional device, e.g. additional pumps on circuits without valves, lights or lawn sprinklers, etc.
- OpenTherm communication
Buffer Tank 1000l with insulation
The tank is black steel. 8 x 6/4" and 1/2" connections
The heating set contains correctly selected and necessary elements for connecting the device (scope of delivery):
The offer applies to the boiler and the items shown. The equipment necessary to burn pellets must be purchased separately!!!
Eco-Design certificate
Thanks to its design, the ATMOS ACxxS boiler uses the principle of generator wood gasification. The boiler body consists of 6-8 mm thick boiler plate. The combustion chambers are equipped with ceramic elements that allow proper wood burning, thanks to which the boiler achieves high thermal efficiency. The centrally arranged rotary gasification grate replaces the ceramic nozzle. The lower chamber is equipped with spherical ceramics. There is a flue gas duct in the rear part of the boiler. The recommended fuel is hard coal, dry logs. The boiler is equipped with an exhaust fan and a cooling coil in case of overheating. This offer includes a boiler in a variant with an adaptation for a pellet burner (to be mounted in the upper door). A burner from ATMOS or another company, e.g. KIPI, Kostrzewa, can be used. This means that the boiler can be operated in the classic way (burning of wood/coal) but also with pellets if required. The boiler is supplied with the original cover plate, which is fitted when firing with wood/coal. However, if you are heating with pellets, screw the burner tight at this point.
DIMENSIONS:
Height: 1185mm
Width: 675mm
Depth: 758mm
Exhaust outlet height: 874 mm
Chimney diameter: 150 mm
Amount of water in the boiler: 45 l
Fuel tank capacity: 65 dm3
Maximum log length: 330 mm
Boiler class: 5 + ECO DESIGN
Energy efficiency class: A+
BOILER ADVANTAGES:
- the ability to burn large pieces of wood, 330 mm long
- high performance;
- Exhaust fan = smoke-free boiler room, dust-free ash removal;
- cooling circuit against overheating;
- Automatic shutdown of the boiler after burning the fuel;
- convenient ash removal thanks to a large ceramic chamber (in the case of wood, it is removed about once a week);
- Boilers without a tubular heat exchanger (easier to clean);
- good quality.
Control Tech I-2:
TECH I-2 PLUS CONTROL UNIT
is the newest regulator model offered by Tech
- The controller is designed to control 2 mixing valve actuators.
- It has a high-resolution LCD display that shows all the parameters of the installation.
- Possibility to connect 2 heat sources
- Possibility to control an additional device, e.g. additional pumps on circuits without valves, lights or lawn sprinklers, etc.
- OpenTherm communication
Buffer Tank 1000l with insulation
The tank is black steel. 8 x 6/4" and 1/2" connections
Thermal insulation made of graphite polystyrene, 80 mm thick, removable for assembly.
The design allows the connection of electric heaters.
Actual capacity: 857L
5 year guarantee
Pressure: 5 bars
Weight: 130kg
Height: 203 cm
Width: 97 cm
Width without insulation: 79 cm
The heating set contains correctly selected and necessary elements for connecting the device (scope of delivery):
- 1x log boiler Atmos AC25S + pellet adjustment 26kW
- 1x OEM Energy 1000l buffer tank with insulation
- 1x expansion tank 100 liters Reflex (Winkelman)
- 3x thermometers
- 4x valves 6/4''
- 4x end caps 6/4''
- 1x quick coupling for membrane vessel
- 3x capillaries
- 1x drain valve
- 4x nipples
- 4x reduction
-1x automatic air vent
- 1x safety group 3 bar
-1x thermal return riser 72°C Laddomat 21-60
- 1x control tech
