KLIMOSZ WALLY HOLZ is a semi-automatic wood gasification boiler. It provides one of the cheapest forms of heating available on the market with current fuel prices. Thanks to the special construction of the exchanger lined with shaped ceramic and modern control of the combustion process, high efficiency of ~90% were achieved. The result is extremely clean flue gas and a clean combustion process, thanks to which this type of boiler fulfills the highest European and national standards and ecological standards like Ecodesign and "5-class".

Klimosz WALLY HOLZ boiler is environmentally friendly - for an ecological and renewable fuel which is wood, which maintains a zero CO2 balance - the growing tree absorbs as much carbon dioxide as generated during combustion, and its ash is only a few kilos of 1 ton, which You can use it as a natural bio-fertilizer in the garden.

​

The boiler is characterized by reliability and safety: as a standard, it is equipped with a cooling coil protecting the boiler from overheating, the "unscrew and press" handles have been specially designed to ensure adequate tightness. The boiler has been equipped with a number of temperature sensors and modern control automatics, in addition, the boiler has a thermal switch - it will turn itself off after burning wood in the combustion chamber.

​

Controll EKOSTER 3

Simple, reliable control supporting 2 pumps, room thermostat, fans (See user guide at bottom of page)

STANDARD:

EKOSTER 2 boiler controller

​

Mechanical cleaning system of the tube exchanger

​

Built-in cooling coil

 

HOW DOES THE WOOD GAS BOILER WORK? The KLIMOSZ WALLY HOLZ boiler provides one of the cheapest forms of heating available on the market at current fuel prices (up to 4 times cheaper than eco-pea) due to the use of cheap and widely available basic fuel such as firewood. Wood, which is very important, must be dry - that is, subjected to seasoning, in order to obtain maximum humidity of 20% (ie about 2 years of seasoning). Thanks to the special design of the exchanger lined with specially shaped ceramic, exhaust fan and modern control of the combustion process, high efficiency of ~ 90% were achieved. The result is extremely clean flue gas and a clean combustion process, thanks to which this type of boiler fulfills the highest European and national standards and ecological standards like Ecodesign and "5-class". Wood burning takes place in two stages in a process called wood gasification (so-called reverse combustion). First, the boiler degasses and burns wood gas (which accounts for up to 80% of the wood content) during the pyrolysis process. Then, the actual combustion takes place - the resulting charcoal due to degassing. To ensure the proper course of the combustion process and trouble-free operation of the boiler, it is required to ensure continuous heat collection by using a buffer tank with a minimum capacity of 55L / 1kW of the boiler together with a LADDOMAT type charging system. The minimum capacity of buffer tanks is:> 800L for WALLY HOLZ 18kW and> 1000L for WALLY HOLZ 25kW.

--> BIEDUNGSANLEITUNG_DE+EN herunterladen

--> BEDIENUNGSANLEITUNG_Steuerung herunterladen